Our Hot Runner Controls HRC 15AL control module has dual digital displays providing readouts of both process and setpoint temperatures. Front panel Soft Start, Open Loop (Manual) Control and Closed Loop PID control buttons allow the user to select the function they want, when they want it, which puts you in control of your heating process quickly and easily. The auto-tuning function allows this controller to determine the PID parameters required for the controlled system. This provides precise control for any temperature process.

FuzyPro Hot Runner Controls Features:

  • Power Supply: 220VAC 50/60 Hz

  • Power Consumption: 5VA

  • Units: °C or °F

  • Inputs: Thermocouple J,T,N,B,S,E,R,K

  • Resolution: 1°

  • Sampling Period: 3 times/second

  • Alarm Out: AL1 deviation high with audible notification.

  • Output: Connect load directly 15A 220VAC

  • Control Mode: Ramp start, close loop PID control and open loop manual PID control.

  • Basic Error: ±0.5% , ± 1 unit.

Hot Runner Temperature Control Systems

Hot runner temperature control systems modules for the plastics processing industry are fully automatic PID controllers with on board diagnostics for Open, Shorted, or Reversed thermocouple.

Hot runner temperature control systems also features LED's for under temperature or over temperature indication, Heat load on/off, Ramp start, and Open or closed loop operation. The display can also be set for set point or process temperature indication and a +/- 3 degree indicator flashes when process temperature is within 3 degrees of setpoint.

Hot runner temperature control systems modules are also designed for full communication capability with alarm and standby module.

Hot Runner Temperature Control Systems Features:

  • Microprocessor based controllers

  • Automatic tuning PID Control

  • Touch pad front panel controls

  • Soft start ramp up standard feature

  • Auto or manual mode available thermocouple status indicator

  • Current indication setpoint or process indication

  • Under/over temperature indication

Hot Runner Temperature Control Systems Specifications:

  • Voltage - 120 or 240 volts

  • Output Current/ Watts - 15 amps 3600 watts at 240 1800 at 120

  • Input - Type J thermocouple Grounded or ungrounded

  • T/C Break protection - Inhibits power to heater

  • Control Accuracy - +/-1ºF or +/- .5ºC

  • Temperature Range - Ambient to 999ºF (535ºC)

  • Cycle time - 0.33 seconds

  • Manual control - Adjustable from 0 to 100%

  • Ramp Start - Duration 5 minutes

  • Output - Zero cross triac triggering

  • Data Communication - IBM PC compatible

  • Compatibility - Hot runner industrial standard compatible

  • Accessories - 600 to 240 volts step down transformers                     - Power connectors 5, 8,12, zones                     - Thermocouple connectors 5, 8,12 zones                     - Floor Stands will support up to 48 zones                     - Main Frames 5, 8,12, Stackable to 48 zone
Appelez nous au (514)956-0606 pour plus d'information
Le meilleur service de l'industrie, votre soumission en moins d'une heure !


Copyright © 2006 Equiplast Inc. All rights reserved.